Can My TV Work in Europe? (A Comprehensive Guide

0
50

You’re either moving to Europe permanently or studying abroad, or simply curious if your TV will work in another country, this is the place for you.

 

Can my TV work in Europe with the correct settings?

Your TV will work in Europe if you have an adapter/converter that converts from 240 volts Europe to 120 volts America. Apps can be streamed to your TV via streaming. An HDMI converter is required to convert HDMI video formats to NTSC.

 

Two main factors are important when determining if your TV will work in Europe. An adapter/converter can overcome electrical differences, while signal transmission differences may render your American TV unusable in Europe.

 

An adapter/converter may be all you need if you own a smart TV, and are not concerned about receiving local TV. It is possible to connect your TV with the internet or steam using its apps.

 

However, you might not be able to access all the smart TV apps depending on where you live. A VPN could be an option. Also, be aware that some smart TV features might only be available in the USA.

 

You will need an HDMI converter to convert your HDMI format to NTSC if you are interested in broadcasting TV via cable, over the air with an antenna, or via satellite.

 

Continue reading for more information.

Electrical differences

The electrical system in Europe differs from America in two key ways. The first is the plug, and the second is the voltage.

 

The shape of the plug
Plugs in Europe have two rounded prongs whereas plugs in the United States use two flat prongs.

The adapter/converter solves this problem. The adapter simply adapts the shape of your US plug to fit into the European outlet.
We can now plug in our TVs. The next problem we need to fix is the voltage.

Voltage
Voltage is what makes electric charge move, without going into too many details.
Appliances in the United States run on 120 volts. European appliances use 240.
You would most likely destroy your 120 volt appliance if you tried to plug it into a 240-volt outlet.
The adapter/converter solves this problem. The converter converts voltage to your TV when you are in Europe. It does this by changing the voltage from 240 volts to 120 volts.

Solution
An adapter/converter will allow you to plug your TV into an European outlet and ensure it receives the correct voltage.
You should not buy any converter if you are using it for a TV. You’ll most likely end up with a converter that is too weak to handle your TV’s power output if you spend too much.

A stronger and more powerful model will be needed.
This adapter/converter is relatively affordable and can handle 500 Watts. It will solve your conversion problem ( price on Amazon). Customers who have used it for this purpose rave about it.

Signal transmission differences
To talk about TV signal transmissions, we must first cover frequencies.

Frequency
In the US and Europe, power is predominantly AC or Alternating Current. Alternating current (AC), a type of electric current that reverses its direction periodically, is different from direct current (DC), which only flows in one direction.
Current can be measured in cycles (also known as frequency). Each time a current travels in a single direction, it is called ‘one complete cycle’. Then it doubles back. The unit for frequency is “Hertz” or Hz.
The average power frequency in North America (60 hertz (Hz),) means that the current performs 60 cycles per second. In Europe, however, the frequency is approximately 50 hertz (Hz).

Modern appliances don’t have to worry about this power frequency difference. Their power supplies can manage it without adverse effects.
Televisions are a notable exception.
The problem your TV is having with its signal transmission standards is not related to circuity.
You won’t harm the circuitry of a modern American television by plugging it into a 50Hz power supply. However, the TV’s image quality will be affected and make it difficult to view.

Formats for signalling
In the early days of TVs, standards (or signals formats)were created to control how information was transmitted from the broadcast station to your home (your TV).
In the end, three standards were created. They are still in use today: and PAL.
Each country uses one of these standards. Your TV is therefore designed to use one of them.

Signal transmission differences
To talk about TV signal transmissions, we must first cover frequencies.

Frequency
In the US and Europe, power is predominantly AC or Alternating Current. Alternating current (AC), a type of electric current that reverses its direction periodically, is different from direct current (DC), which only flows in one direction.
Current can be measured in cycles (also known as frequency). Each time a current travels in a single direction, it is called ‘one complete cycle’. Then it doubles back. A unit of frequency called “Hertz” or “Hz”.

 

The average power frequency in North America (60 hertz (Hz),) means that the current performs 60 cycles per second. In Europe, however, the frequency is approximately 50 hertz (Hz).
Modern appliances don’t have to worry about this power frequency difference. Their power supplies can manage it without adverse effects.

Televisions are a notable exception.
The problem your TV is having with its signal transmission standards is not related to circuity.
You won’t harm the circuitry of a modern American television by plugging it into a 50Hz power supply. However, the TV’s image quality will be affected and make it difficult to view.

Formats for signalling
In the early days of TVs, standards (or signals formats)were created to control how information was transmitted from the broadcast station to your home (your TV).
In the end, three standards were created. They are still in use today: PAL and.
Each country uses one of these standards. Your TV is therefore designed to use one of them.

LEAVE A REPLY

Please enter your comment!
Please enter your name here