Television says there is no signal, but cable box is on (EASY Fix!)

0
59

Television sets today are extremely reliable, have no signal issues or problems with the cable boxes. There is an easy and tested solution.

Television claims there is no signal, but cable box is on

If your TV doesn’t show any signal, you must restart the cable box. Wait at least 60 seconds after unplugging your cable box from the wall outlet. Then plug it back in. If this doesn’t solve the problem, you may need to check that the HDMI port is functioning properly.

A TV that doesn’t display signal messages is usually caused by a cable box. Although it may seem like your TV is turned on, the cable box is usually responsible. This happens all the time, which is quite surprising.

Simply press the power button. If your box does not include a remote control, you can use it.

Indicators lights are used to indicate whether a set-top box or cable box is on or off. A green signal will mean that the box has turned on, while a red signal means that it is off.

Reboot the Cable Box

Rebooting your cable box after you confirm that it is ON will fix any “No Signal” problems.

Use a different HDMI port

A No Signal message can be generated if an HDMI port isn’t working correctly. A No Signal message can be caused by a faulty HDMI port.

Each port is assigned a number between 1 and 3. HDMI ARC will identify one port. This port connects your TV with a soundbar or home theatre system. It is not crucial.

Connect another device, such as a Blu Ray player or DVD player, to test the ports.

Your HDMI Cable can be switched

Sometimes your TV may display a No signal message because of a faulty HDMI Cable.

Although the cable box may be on, the HDMI cable might not work correctly. A damaged cable can only be repaired by replacing it.

There are two ways to choose the right input source.

Method 1 Remote Control to Enable the InputSource

  1. Turn on your TV
  2. To press the Source button, use the remote control
  3. Select the input mode that you prefer

Most cable boxes are compatible with HDMI 1 or HDMI 2. Most cable boxes can be connected to the TV via HDMI 1, or HDMI 2.

There are two options to choose the best input source.

Method 1 – Remote Control to Enable inputSource

 

  1. Turn on your TV
  2. To press the Source button, use the remote control
  3. Select the input mode that you prefer

Most cable boxes are compatible with HDMI 1 or HDMI 2. Most cable boxes can be connected to the TV via HDMI 1, or HDMI 2.

Reset Your TV

Resetting your TV can fix many issues, including black screen, no signal problems, and non-responsive remote control.

Before you turn on your TV, make sure it is switched on. Make sure your TV is off before you attempt to reset it.

These are the three options you have to reset your TV.

Method 1: Unplug the Power Cable and Reset

  1. It is vital to turn off your television Unplug power cable from wall outlet
  2. It should take 60 seconds.
  3. Connect the power cord to the wall outlet.
  4. Turn on your TV

Method 2 – Reset Using TV Menu

  1. To press the HOME button, use the remote control
  2. Go to Settings
  3. Select “About” under settings
  4. Select Restart
  5. Verify that the above steps have solved the problem

Method 3 – Reset Using Remote Control

  1. Turn on your TV
  2. Point your remote at TV
  3. For five seconds, hold the power button down
  4. Your TV will turn on and off automatically.
  5. To see if this solution solves your problem,

Factory Reset Your CableBox

Many issues can be fixed by resetting the factory of your cable box.

The brand of your cable box might have a recessed reset switch on the back. Simply press the button using a pin, pen or stylus to factory reset your cable box.

The remote control can be used to reset your cable box. These are the steps.

  1. Turn on your TV
  2. Turn on your cable box
  3. You can find the MENU button on the remote control for the cable box.
  4. Go to Settings
  5. Scroll down and select Restore defaults or Restart
  6. Exit the menu to restart your cable box

You can reset your cable box by unplugging it from the wall outlet.

  1. Turn on your cable box
  2. After you’ve installed the cable box, unplug the power cord from the wall outlet.
  3. Minimum 60 seconds
  4. Securely connect the cable to the wall outlet
  5. Press the power button to turn on the cable box

Get in touch

Sometimes your TV may say “No Signal” due to problems with your cable provider. To find out if your TV is showing “No Signal” and how long it will take to fix the problem, contact support.

It is possible that there will be a temporary outage. You will not be able to watch your favorite shows until your cable provider fixes the problem.

Conclusion

These tips will help you resolve no signal problems quickly.

Here are some things you can do for your TV.

  1. Verify that your cable box remains active
  2. Reboot your cable books
  3. Connect the HDMI cable to your computer and then disconnect it.
  4. Connect to another HDMI port
  5. Your HDMI cable can be switched
  6. Select the best input source
  7. Reset your TV
  8. Factory reset your cable box
  9. Get in touch for support
  10. It is time to replace your cable box

These should have solved your problem with TV saying no signal but the cable box is on. Let me know which one solved your problem in comments.

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here